| 🏠 Metal Roof Installation |
From $8/sq ft |
Complete metal roof installation for homes across Bakersfield and Kern County: panel systems engineered for 100-degree summers and relentless UV, installed over high-temperature synthetic underlayment with proper ventilation and carefully lapped flashing for a long service life. |
| 📐 Standing Seam Metal Roofing |
From $10/sq ft |
Concealed-fastener standing seam systems, a premium choice for Bakersfield homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as valley heat expands and contracts the roof every day, and a cool reflective finish that fights the summer sun. |
| ♻️ Metal Roof Replacement |
From $9/sq ft |
Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Many California carriers recognize fire- and impact-rated roofs, so ask yours. |
| 🔄 Metal Roof Over Shingles (Retrofit) |
From $7/sq ft |
A new metal roof installed directly over your existing asphalt shingles with no tear-off, less waste and lower cost. Popular on Bakersfield ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| 🔧 Metal Roof Repair |
From $450 |
Repair of damaged, loose or wind-hit metal roofing: replacing dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a rare valley downpour becomes interior damage. |
| 🚨 Metal Roof Leak Repair |
From $450 |
Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available ahead of winter storms. |
| 🪛 Screw Replacement & Re-Fastening |
From $750 |
Bakersfield's summer heat and sharp day-to-night swings flex metal roofs daily, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| 🏗️ Corrugated & Ribbed Panel Roofing |
From $5.50/sq ft |
Exposed-fastener metal roofing (corrugated, R-panel and 5V) is the budget-friendly workhorse for homes, carports, barns, shops and oilfield and farm buildings across Kern County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust. |
| 🏘️ Metal Shingle Roofing |
From $9/sq ft |
Metal shingles that give the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Bakersfield homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for Tehachapi gusts. |
| 🪨 Stone-Coated Steel Roofing |
From $9/sq ft |
Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind performance, a Class A fire rating, and profiles that mimic the Spanish clay tile and shake looks common on Bakersfield homes, a good match for ember-prone foothill lots. |
| ✨ Copper & Specialty Metal Roofing |
From $20/sq ft |
Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last in the dry valley air. Custom fabrication for the fine details. |
| 🎨 Metal Roof Coating & Painting |
From $2.50/sq ft |
Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| 🏔️ Flashing, Chimney & Skylight Repair |
From $600 |
Repair and custom fabrication of flashing around chimneys, skylights, valleys, parapet walls and stucco transitions, the number one leak point on Bakersfield roofs when a winter storm arrives. In-house bent flashing for a precise watertight fit. |
| ❄️ Snow Guards & Ice Protection |
From $1,200 |
Bakersfield never needs snow guards, so this service is about what does apply here: reflective cool-roof coatings, ember-resistant vent and edge details for foothill lots, and wind-uplift fastening for Tehachapi gusts. Honest guidance on whether your roof needs any of it. |
| 🌪️ Storm & Wind Damage Repair |
Free inspection |
Repair of wind, hail and fire-ember damage to metal roofing, plus winter storm leaks: thorough documentation with photos, an honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| 🔍 Metal Roof Inspection |
Free estimate |
Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, plus a straight answer on remaining service life with a written report. |
| 💧 Gutters for Metal Roofs |
From $9/linear ft |
Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry occasional heavy winter rain away from stucco walls and foundations, with details that handle valley dust and debris. |
| 🏭 Commercial & Agricultural Metal Roofing |
Free estimate |
Metal roofing for barns, packing sheds, workshops, churches, carports and light commercial buildings across Kern County, from almond and citrus farm buildings to oilfield shops and Northeast and Southwest business parks, with durable panel systems, insulation options and repairs. |