Licensed & Insured, in Bakersfield and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Bakersfield
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (661) 493-8685 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Bakersfield and surrounding areas · On-site visits included · Free estimate within 24h
Bakersfield Metal Roofing is a team of local certified professionals based in Bakersfield. We respond quickly in Bakersfield and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (661) 493-8685⭐⭐⭐⭐⭐ 4.9/5 · 297 verified Google reviews
“We had them put up a metal roof on the covered patio we built in the backyard, and honestly it turned out better than the main house roof. The crew knocked it out in a day and a half and swept every screw and metal shaving off the concrete before they left. My wife was worried about the noise but it was fine.”
Metal Roof Installation
“Getting the old roof replaced with copper was a big decision for us, but the crew treated our 1920s house like it mattered to them. The soldering on the valleys and flashing around the chimney is genuinely beautiful work. It wasn't the cheapest bid we got, but it was the only one that felt right.”
Copper & Specialty Metal Roofing
“Our old barn out by the orchard was leaking every time it rained and we figured it was a goner. They re-fastened the whole thing and replaced a bunch of screws that had backed out over the years, and now it's dry as a bone. Way cheaper than tearing it down and starting over, which is what I was afraid of.”
Commercial & Agricultural Metal Roofing
“Went with standing seam on our place and I'm glad we did. The panels are clean and straight, no exposed screws anywhere, and they walked me through the whole thing before starting. Only gripe is they got rained out one day and pushed us back about a week, but they kept me posted the whole time.”
Standing Seam Metal Roofing
“Had a leak over the shop at the farm that three other guys couldn't find. These folks got up there, found the bad flashing around the vent pipe, fixed it, and we haven't had a drop since. Should've called them first.”
Metal Roof Repair
“We were dreading a full tear-off on our house, so when they told us they could go right over the old shingles with metal panels we were relieved. Saved us a ton of money and a week of chaos. The new roof looks sharp and the gutters they hung match perfectly.”
Metal Roof Over Shingles (Retrofit)
“Our house has that Spanish tile look and I didn't want to lose it. They set us up with metal shingles in a tile profile and from the street you honestly can't tell the difference. The crew was polite, cleaned up after themselves every single day, and finished right when they said they would.”
Metal Shingle Roofing
“After the metal roof went on, the old gutters just weren't cutting it and water was pouring off the edge of the driveway. They came back out and ran new seamless gutters sized for the metal roof, and now everything drains where it's supposed to. Small job for them but they treated it like it mattered.”
Gutters for Metal RoofsReal photos of our work in Bakersfield · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel roof | Starting at $8/sq ft | Includes tear-off, high-temp underlayment, panels and standard flashing; pitch and deck condition move the price. |
| Standing seam metal roof | Starting at $12/sq ft | Concealed fasteners and raised seams; roof complexity, panel width and number of valleys drive the final number. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes stamped panels and trim; HOA or historic-district profiles and color choices can affect cost. |
| Complex or large-scale job | On estimate | Multi-plane roofs, second stories, skylights and chimney work need an on-site look before we quote. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, standard roof | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and trim on a straightforward gable roof with normal access. |
| Mechanically seamed panels | Starting at $13/sq ft | Adds machine-seamed joints for maximum watertightness, common on low-slope and long-run roofs. |
| Tear-off and deck repair | Quoted per job | Removal of existing layers and replacement of soft sheathing priced after we inspect the deck. |
| Complex roof with valleys and dormers | On estimate | Cut-up roofs, steep pitches, and multiple penetrations need an on-site measure before pricing. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, new underlayment and corrugated or ribbed panels, with deck repair as the main cost mover. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams, with roof pitch and valley count driving the final number. |
| Stone-coated steel or metal shingle replacement | Starting at $15/sq ft | Textured tile or shake profile over steel, with complexity of penetrations and hips affecting price. |
| Complex or large-scale job | On estimate | Two-story homes, steep pitches and heavy deck repair need an on-site look before we quote. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel retrofit | Starting at $7/sq ft | Includes underlayment, battens, panels, and standard flashing; pitch and roof complexity move the price. |
| Stone-coated steel retrofit | Starting at $9/sq ft | Includes textured steel shingles or tiles, underlayment, and HOA-friendly profiles; roof cuts add cost. |
| Standing seam retrofit | Starting at $11/sq ft | Includes concealed-fastener panels on battens; panel width, color, and height drive the final number. |
| Deck repair or re-sheathing | On estimate | Priced per sheet after inspection; soft sheathing found during the walk-through is quoted before work starts. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small flashing) | Starting at $450 | Covers inspection and fixing a handful of failed fasteners or one penetration; access and pitch raise it |
| Panel replacement (single panel) | Starting at $650 | Includes matching panel profile and color; material type and roof height move the price |
| Flashing rebuild (chimney, skylight, sidewall) | Starting at $750 | Full tear-out and rebuild of the failed detail; stucco or tile surroundings add labor |
| Multi-panel or widespread wind damage | On estimate | Scope depends on how many panels and details failed; we need to see the roof first |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak repair | Starting at $450 | Roof walk, leak trace, fastener or boot replacement and sealing at one entry point. |
| Multiple leak points | Starting at $750 | Several failed fasteners, boots or flashing joints repaired in one visit across the roof. |
| Flashing or penetration rebuild | Starting at $900 | Chimney, skylight or parapet flashing reset with new counterflashing and sealant. |
| Emergency tarp and dry-in | Starting at $550 | Storm-ahead tarping to stop active water intrusion until the permanent repair is scheduled. |
| Complex or large-scale job | On estimate | Widespread fastener failure or panel damage needs an on-site look before pricing. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic re-fastening (single story) | Starting at $750 | Includes roof walk, failed fastener mapping, and replacement of up to 50 screws with UV washers. |
| Full roof re-fastening sweep | Starting at $1,450 | Replaces every fastener and washer on a typical single-story home, priced by square footage. |
| Two-story or steep-pitch roof | Starting at $1,900 | Higher due to access, safety setup, and ladder work on Stockdale and Seven Oaks homes. |
| Commercial or agricultural building | On estimate | Large square footage and panel count require an on-site walk before we quote a firm price. |
| Travel | Included | in Bakersfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation | Starting at $5.50/sq ft | Includes panels, underlayment, closures, and standard trim; heavier gauge or premium color adds cost. |
| R-panel (ribbed) roof installation | Starting at $6.25/sq ft | Includes trapezoidal panels, trim, and fasteners; roof complexity and pitch drive the final figure. |
| 5V crimp agricultural or shop roof | Starting at $5.75/sq ft | Includes panels, closures, and standard flashing; larger spans and access conditions affect pricing. |
| Retrofit over existing shingles | Starting at $7.00/sq ft | Includes battens, underlayment, and panels over existing roof; code limits on shingle layers apply. |
| Complex or large-scale job | On estimate | Multi-plane roofs, steep pitches, and heavy flashing work need an on-site look before a number. |
| Estimate | Free | Response within 24 hours at (661) 493-8685, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (simple gable) | Starting at $9/sq ft | Includes tear-off, underlayment, panels, flashing and cleanup on straightforward single-story roofs. |
| Metal shingle roof replacement (complex roof) | Starting at $12/sq ft | Covers valleys, skylights, steep pitch and multiple planes that slow the install. |
| Metal roof over shingles (retrofit) | Starting at $8/sq ft | Includes prep and panels over an existing layer, subject to code layer limits. |
| Complex or large-scale job | On estimate | Steep pitch, historic review or heavy flashing scope needs an on-site look before pricing. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel install, single-story ranch | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard flashing on an accessible low-pitch roof. |
| Tile-profile system on a two-story home | Starting at $12/sq ft | Includes steeper pitch work, multiple valleys, and matching stone-coated accessories. |
| Retrofit over existing shingles | Starting at $10/sq ft | Includes prep and panels over one sound layer where local code allows. |
| Foothill ember-resistant system | On estimate | Needs an on-site look at exposure, deck condition, and ember detailing before pricing. |
| Travel | Included | in Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window) | Starting at $20/sq ft | Includes custom fabrication and flashing; price rises with detail complexity and access difficulty. |
| Full copper roof | Starting at $28/sq ft | Includes panels, underlayment, and custom flashing; roof shape and height drive the final price. |
| Zinc or aluminum specialty roof | Starting at $18/sq ft | Includes panels and standard flashing; unusual shapes or heavy detail work raise the price. |
| Custom fabrication and flashing | On estimate | Complex shapes and on-site forming need a look before we quote a number. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound, chalky panels | Starting at $2.50/sq ft | Includes pressure wash, chalk removal and one reflective topcoat on panels with no significant rust. |
| Rust treatment and coating system | Starting at $3.50/sq ft | Adds rust conversion, spot priming and fastener replacement; severity of pitting moves the price. |
| Elastomeric coating on low-slope panels | Starting at $4.00/sq ft | Thicker film for seam wear and minor imperfections; roof pitch and access affect the final rate. |
| Two-story or steep-pitch roof | On estimate | Height, pitch and landscaping access need an on-site look before we quote a number. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney counterflashing repair | Starting at $600 | Covers removal of failed flashing and new custom-bent metal lapped into masonry and roof course |
| Skylight curb re-flash | Starting at $600 | Includes perimeter flashing replacement and water test, price rises with roof pitch and height |
| Valley or wall transition flashing | Starting at $750 | Lifting field courses and installing new valley metal, cost moves with roof material and access |
| Complex or large-scale job | On estimate | Multiple leak points, rotted decking, or custom panel-profile saddles need an on-site look first |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Focused protection scope | Starting at $1,200 | Covers small-area coating or re-fastening a wind-damaged section, priced by roof area and access. |
| Whole-roof reflective coating | Starting at $2,400 | Includes surface prep and high-reflectance coating; roof size and panel condition move the price. |
| Wind-uplift fastening upgrade | Starting at $1,800 | Replacement screws and revised fastening patterns; panel count and eave length drive the total. |
| Ember-resistant edge and vent detailing | On estimate | Foothill properties need an on-site look at ridge length, vent count and exposure before pricing. |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written assessment of repair versus replacement scope. |
| Fastener and washer replacement | Starting at $350 | Price moves with roof size, number of backed-out screws, and access height. |
| Panel and flashing repair | Starting at $650 | Includes matched panel or flashing material; profile availability and pitch affect the total. |
| Complex or large-scale storm damage | On estimate | Widespread damage, decking replacement, or insurance scope needs an on-site look first. |
| Travel | Included | in Bakersfield and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free estimate and roof assessment | Free | On-site look at your roof with verbal findings, no obligation to book any work |
| Standard written inspection report | Starting at $250 | Full roof walk, fastener and flashing check, photos and written findings included |
| Insurance documentation inspection | Starting at $350 | Photo evidence and formatted report for a claim file, priced by roof size and access |
| Pre-purchase or multi-building inspection | On estimate | Needs an on-site look first because panel types, roof count and access vary widely |
| Travel | Included | in Bakersfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard single-story | Starting at $9/linear ft | Includes on-site fabrication, hidden hangers, outlets and standard downspouts for a typical single-story run |
| Two-story or difficult access | Starting at $13/linear ft | Higher rate reflects ladder work, staging and safety setup on two-story stucco homes in Seven Oaks and Stockdale |
| Half-round steel or copper | On estimate | Material cost and soldered or sealed joint labor vary widely, so we price after measuring the run |
| Leaf protection add-on | Starting at $4/linear ft | Micro-mesh or screen covers priced per foot on top of the gutter rate, recommended where palms and olives drop debris |
| Travel | Included | In Bakersfield and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (661) 493-8685, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free on-site estimate | Free | Full roof walk, measurements and written scope with panel and fastener options |
| Repair and re-fastening | Starting at $450 | Screw and washer replacement, lap resealing and minor flashing repair included |
| Small shed or carport re-roof | Starting at $2,800 | Ribbed panel system over sound deck, price moves with square footage and access |
| Packing shed or shop replacement | On estimate | Needs on-site look for deck condition, insulation, slope and staging access |
| Travel | Included | In Bakersfield and surrounding Kern County areas, no separate call-out fee |
| Estimate response | Free | Reply within 24 hours at (661) 493-8685, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Bakersfield need a crew that understands this valley's particular brand of punishment: triple-digit summer heat, relentless UV, tule fog, blowing dust, and Tehachapi wind that finds every loose fastener. Bakersfield Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair, working on everything from low-slope ranch homes in Oildale to steep-pitch cabins in the foothills. We serve Bakersfield, Delano, Wasco, Shafter, McFarland, and the surrounding communities with a network of licensed, bonded, and insured local contractors.
Our region has a large stock of 15 to 30 year old exposed-fastener roofs whose sealing washers are drying out, plus older Craftsman bungalows, Spanish stucco homes, and newer subdivision houses with concrete tile. Whether you need a standing seam system on a custom home or a leak traced on an aging screw-down roof, we give straight guidance on repair versus replace and coating versus re-roof. Call (661) 493-8685 or request a free estimate to get started.
Most metal roof leaks in Bakersfield trace back to a handful of predictable failures. The number one culprit on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack under years of UV and heat. Once that washer fails, water walks right past the screw head. Seam separation from thermal movement is next: panels expand and contract daily, and if clips or fasteners can no longer hold, seams open. Failed pipe boots and flashing at chimneys, skylights, and valleys let water slip behind the metal, and wind-lifted panels or punctures from fallen limbs finish the list.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a ceiling stain, the sheathing underneath may already be rotted and the insulation saturated. That is why we trace the actual source rather than patching the first wet spot we see. Our metal roof leak repair service includes a full inspection of fasteners, seams, closures, and flashing, with written findings and photos.
The honest call between repair and replacement depends on the roof's age and overall condition. If the panels are sound and the failures are isolated, a targeted repair or a full screw replacement with new fasteners and sealing washers often restores a watertight roof for a fraction of replacement cost. If the metal itself is perforated or the deck is soft across large areas, replacement is the better money. We will tell you plainly which one you need. Call (661) 493-8685 or reach out through our contact page to schedule an inspection.
We install the full range of metal systems and match the product to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean profile and long service life, and it is the premium choice for custom homes and anyone who wants to stop worrying about screws. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the existing deck is sound, and a full tear-off is the right call when it is not. We will walk you through both.
Metal roof costs in Bakersfield are typically quoted per square foot for installations, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges only, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. See our pricing page for ballpark ranges.
The fastest way to a real number is a free estimate or free roof inspection. We will measure, check the deck and flashing, and give you a written scope with options, including repair if that is the smarter spend. Call (661) 493-8685 to schedule.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, the rules are informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and historic district or HOA design review can affect panel profile and color choices. We never state a specific threshold, fee, or layer limit as fact.
Requirements vary, always verify with the Bakersfield building or planning department before starting your project. For help understanding the process or to schedule an inspection, contact us.
Ready to get started? Bakersfield Metal Roofing serves in Bakersfield and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Bakersfield · Response within 24h · No commitment · ☎ (661) 493-8685
Your Free Quote Request