Serving the Bakersfield area  ·  (661) 493-8685  ·  Open Mon-Sun 7am-7pm
📞 (661) 493-8685 Free Quote

Metal Roofing in McFarland, CA (93250) · Local Professionals

Bakersfield Metal Roofing · Fast response in McFarland and the Bakersfield area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+297Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

McFarland is a small town where the roofs take a beating. The sun hits hard here on the valley floor, and most homes are older single-story builds with low-pitch roofs that have seen decades of heat and dust. If you live near McFarland Park or along Sherwood Avenue, you know the look: faded shingles, rusted screws, and the occasional leak after a winter storm.

We are Bakersfield Metal Roofing, and we have been helping homeowners in McFarland (93250) and the surrounding area with metal roofing for years. Whether your place is near the high school or out by the almond orchards, we know the local conditions and what it takes to keep a roof tight.

Metal Roofing in McFarland (93250)

McFarland sits on flat ground in the southern San Joaquin Valley, with sandy to clay soil that shifts a little with the seasons. Most properties here are modest single-family homes on decent-sized lots, many with detached garages or sheds. The housing stock is a mix of older ranch-style homes and some newer builds, often with low-pitched roofs that were originally shingled. The intense summer sun, sometimes over 100 degrees for weeks, bakes those shingles until they crack and curl. Winter brings tule fog and occasional heavy rain, and wind can whip across the open fields and lift loose panels. We also see dust and grit that works its way under fasteners and speeds up corrosion. Our team understands these local challenges and knows how to install metal roofs that stand up to them.

We have worked on homes throughout McFarland and the surrounding Bakersfield area, from small repairs to full replacements. We know the local building department and what it takes to get a permit, and we can help you choose a metal roofing system that fits your home and your budget.

Our services in McFarland

How a Job Works in McFarland

Step 1: You call us at (661) 493-8685 or fill out our online form. We will schedule a free on-site assessment at your McFarland property. Our team will inspect your roof, take measurements, and discuss your options. We will explain what we find and give you a written estimate.

Step 2: Once you approve the estimate, we will pull the necessary permits from the city of McFarland and schedule the work. On the day of the job, our crew will arrive on time and get started. If your home is in a historic district or has HOA rules, we will make sure the panel profile and color meet those requirements. We will also protect your landscaping and keep the work area tidy.

Step 3: After the installation is complete, we will do a thorough cleanup, including magnet sweeping for nails and debris. We will walk through the finished roof with you, answer any questions, and make sure you are satisfied. We leave your property clean and your roof ready for the next season.

Pricing for metal roofing in McFarland depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical single-story home, metal roof installation starts at around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an existing roof, expect starting prices around $9 per square foot, and a retrofit over shingles starts at $7 per square foot. Repairs, like fixing a leak or replacing screws, start at $450. We also offer metal roof coating and painting from $2.50 per square foot, which is a good option for older roofs that just need a refresh. For a free estimate tailored to your McFarland home, call us at (661) 493-8685.

My house near McFarland High School has an old shingle roof that is cracking from the sun. Can you install a metal roof over it?
Yes, we can often install a metal roof over your existing shingles if the structure is sound and local code allows it. This is called a retrofit, and it starts at $7 per square foot. We will inspect your roof to make sure it is a good candidate and pull the necessary permits from the city of McFarland.
A windstorm just lifted some panels on my roof. Do you handle emergency repairs in McFarland?
We do. Call us at (661) 493-8685 for storm and wind damage repair. We offer free inspections for storm damage and can secure your roof quickly to prevent further issues. Our team serves McFarland and the surrounding areas.
What is the typical cost for a metal roof on a small home in McFarland?
For a small single-story home, metal roof installation starts at around $8 per square foot, but the final price depends on the roof size, material, and any needed repairs. We provide free estimates so you know exactly what to expect before we start.
Do I need a permit for a metal roof replacement in McFarland?
Yes, roofing permits are commonly required for a full replacement or re-roof in McFarland. The exact requirements and fees vary, so we always check with the city building department before starting work. We handle the permitting process for you.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage issues on their side. Can you help?
Absolutely. We are careful about property lines and drainage. We will design your roof and gutters so water flows away from your neighbor's property. If you have HOA rules, we can also help you get approval for the panel style and color.
Are you fully insured for work on my McFarland property?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing our team is protected while working on your home.
How often should I have my metal roof inspected in McFarland?
We recommend an inspection every two to three years, especially after a big storm or if you notice any leaks. The intense sun and dust in McFarland can loosen fasteners over time. Regular maintenance, like tightening screws and checking flashing, can extend the life of your roof. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Bakersfield

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Bakersfield

All your work handled by qualified professionals in Bakersfield

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

297+ Verified Client Reviews in Bakersfield

⭐⭐⭐⭐⭐ 4.9/5 · 297 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Bakersfield · Response within 24h · No commitment · ☎ (661) 493-8685

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Bakersfield ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm