In Bakersfield, metal roofing projects typically range from a few hundred dollars for minor repairs to several thousand for a full installation, depending on the material, roof size, and complexity. Prices vary due to factors like roof pitch, accessibility, and the specific metal system you choose, but we're here to help you understand the options and make an informed decision.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Bakersfield and Kern County: panel systems engineered for 100-degree summers and relentless UV, installed over high-temperature synthetic underlayment with proper ventilation and carefully lapped flashing for a long service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, a premium choice for Bakersfield homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as valley heat expands and contracts the roof every day, and a cool reflective finish that fights the summer sun. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Many California carriers recognize fire- and impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles with no tear-off, less waste and lower cost. Popular on Bakersfield ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or wind-hit metal roofing: replacing dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a rare valley downpour becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available ahead of winter storms. |
| Screw Replacement & Re-Fastening | From $750 | Bakersfield's summer heat and sharp day-to-night swings flex metal roofs daily, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V) is the budget-friendly workhorse for homes, carports, barns, shops and oilfield and farm buildings across Kern County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that give the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Bakersfield homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for Tehachapi gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind performance, a Class A fire rating, and profiles that mimic the Spanish clay tile and shake looks common on Bakersfield homes, a good match for ember-prone foothill lots. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last in the dry valley air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, parapet walls and stucco transitions, the number one leak point on Bakersfield roofs when a winter storm arrives. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Bakersfield never needs snow guards, so this service is about what does apply here: reflective cool-roof coatings, ember-resistant vent and edge details for foothill lots, and wind-uplift fastening for Tehachapi gusts. Honest guidance on whether your roof needs any of it. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, hail and fire-ember damage to metal roofing, plus winter storm leaks: thorough documentation with photos, an honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, plus a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry occasional heavy winter rain away from stucco walls and foundations, with details that handle valley dust and debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, packing sheds, workshops, churches, carports and light commercial buildings across Kern County, from almond and citrus farm buildings to oilfield shops and Northeast and Southwest business parks, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs or those with multiple slopes, valleys, and penetrations require more materials and labor, increasing the overall cost.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper each have different price points based on durability, appearance, and installation requirements.
- Accessibility and roof height : Difficult-to-reach areas, steep pitches, or multi-story homes may require additional safety measures and time, affecting labor costs.
- Condition of existing roof : If removal of old roofing, decking repairs, or structural reinforcements are needed, these add to the project cost.
What's included
- Travel included across the Bakersfield area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather your roof's approximate square footage, know the material you're interested in, and note any existing issues like leaks or damage. A Bakersfield Metal Roofing estimator will assess your roof, discuss options, and provide a detailed written quote that includes materials, labor, and cleanup. Call (661) 493-8685 to schedule your free estimate and ask about anything that's unclear.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated steel vs. copper), roof complexity, home height, and whether it's a new installation, replacement, or repair. Each project is unique, so we provide a customized quote after assessing your specific needs.
Do you offer free estimates?
Yes, we provide free estimates for most services, including metal roof installation, replacement, and inspections. Call (661) 493-8685 to schedule your appointment and get a no-obligation quote.
What payment methods do you accept?
We accept cash, checks, and major credit cards. For larger projects, we can discuss financing options or payment schedules to make your investment manageable.