Serving the Bakersfield area  ·  (661) 493-8685  ·  Open Mon-Sun 7am-7pm
📞 (661) 493-8685 Free Quote

Metal Roofing in Delano, CA (93215) · Local Professionals

Bakersfield Metal Roofing · Fast response in Delano and the Bakersfield area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+297Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Delano is a farm town where the roofs take a beating. The sun hits hard from May through September, and the flat valley floor means wind and dust have nothing to slow them down before they hit your shingles or panels.

Homes here are mostly older stucco and wood-frame houses, many with low-pitched roofs that were built for a different era of weather. We serve Delano (93215) and the surrounding area from our Bakersfield base, and we know the specific problems that show up on roofs along the Highway 99 corridor and out toward the packing houses.

Metal Roofing in Delano (93215)

Delano sits on flat ground with sandy-to-clay soil, and that matters for roofing. The soil shifts slightly with irrigation and dry spells, which can stress flashing and fasteners over time. Most homes here are single-story ranches and older bungalows with low slopes, and many have had multiple layers of shingles added over the decades. That buildup is a common reason we get called out: the roof is heavy, the fasteners are backing out, and the next layer is no longer an option under code. We also work on the agricultural and commercial buildings around Delano, where metal roofs are the standard because they handle heat and dust better than anything else.

Our team has worked throughout Kern County, from the older neighborhoods near downtown Delano to the newer subdivisions and the farm properties out on the edges. We know how to deal with the specific wind patterns that come off the valley floor and the way summer heat can cook a poorly ventilated attic.

Our services in Delano

How a Job Works in Delano

Step 1: You call us at (661) 493-8685 or request a free estimate. We schedule an on-site assessment, usually within a few days. We look at the roof condition, the attic ventilation, the flashing, and the fasteners, and we give you a written estimate with options. No pressure, no sales pitch.

Step 2: Once you approve, we pull the permit through the City of Delano building department. Permit timing can vary, so we handle that for you. On the day of the job, our crew arrives with the materials and gets to work. If your home is in an older neighborhood with tight lot access, we plan for that ahead of time so we don't block driveways or damage landscaping.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and walk the property with you to make sure you're satisfied. We don't leave until the site is clean and you've signed off.

Pricing in Delano depends on the size and pitch of your roof, the condition of the existing materials, and how accessible the property is. For a typical single-story ranch home, metal roof installation starts around $8 per square foot, and standing seam starts around $10 per square foot. If you're replacing an existing roof, that starts around $9 per square foot, and a retrofit over shingles starts around $7 per square foot. Repairs start at $450 for small fixes like flashing or fastener issues. We give you a clear, written estimate before any work begins. Call (661) 493-8685 for a free estimate.

My house is near the old Delano High School area, and the roof is original to the 1950s. Is it worth switching to metal?
Yes, especially on those older homes. The original roofs were often low-slope and not well ventilated, which shortens the life of shingles. Metal reflects heat better, lasts longer, and can be installed with a retrofit over the existing shingles if the structure allows it. We check the decking and framing first to make sure it's sound.
A windstorm just peeled back some panels on my barn off County Line Road. Can you get out quickly?
We handle storm and wind damage repairs and offer free inspections for that. Call us at (661) 493-8685, and we'll schedule a visit as soon as possible. We can tarp or secure the area temporarily if needed and give you a repair estimate.
What's a realistic budget for a metal roof on a 1,500 square foot house in Delano?
For a basic corrugated or ribbed panel roof, you're looking at roughly $5.50 to $8 per square foot installed, so around $8,000 to $12,000 for that size. Standing seam runs higher, around $15,000 and up. The exact price depends on pitch, access, and whether we're removing old shingles. We give you a firm number after seeing the roof.
Do I need a permit from the City of Delano to replace my roof?
Yes, a full replacement or re-roof typically requires a permit. The City of Delano Building Department handles those, and requirements can vary. We pull the permit for you and make sure the work meets local code. If your home is in a historic area or HOA, there may be additional design review.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
In California, you generally have the right to install a roof that overhangs your property line by a small amount for drainage, but it's best to check with the city and talk to your neighbor first. If you're in an HOA, get approval before ordering materials. We can help you understand the setback requirements.
Are you fully insured for work on my property in Delano?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Delano's heat and dust?
Metal roofs are low maintenance, but the dust and grit here can clog gutters and valley areas. We recommend a yearly inspection, especially after windy seasons, to check fasteners and clear debris. A coating every 10 to 15 years can extend the life of the finish.
Why choose us?

Trusted professionals in Bakersfield

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Bakersfield

All your work handled by qualified professionals in Bakersfield

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

297+ Verified Client Reviews in Bakersfield

⭐⭐⭐⭐⭐ 4.9/5 · 297 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Bakersfield · Response within 24h · No commitment · ☎ (661) 493-8685

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Bakersfield ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm