Serving the Bakersfield area  ·  (661) 493-8685  ·  Open Mon-Sun 7am-7pm
📞 (661) 493-8685 Free Quote

Metal Roofing in Oildale, CA (93301) · Local Professionals

Bakersfield Metal Roofing · Fast response in Oildale and the Bakersfield area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+297Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oildale is a tight-knit community north of the Kern River, where decades-old ranch homes and oilfield-era bungalows line streets off North Chester Avenue and Manor Street. The housing stock here is mostly 1950s to 1970s stucco and brick ranches with low-pitched composition shingle roofs, many of which are now well past their prime and showing the wear that comes from relentless valley sun, dust, and winter tule fog. If you live near Standard Park or along the Oildale corridor, you know the look: roofs that have been patched a dozen times and are ready for a real solution.

That is why homeowners in Oildale (93301) call Bakersfield Metal Roofing. We understand the specific challenges of these older properties, from tight lot access to aging decking that needs attention before a new roof goes on. Our team provides honest assessments and quality metal roofing installations, repairs, and replacements that stand up to Kern County's extreme dry heat, strong Tehachapi winds, and occasional winter downpours. We treat every Oildale home like it is our own, and we are proud to serve this community.

Metal Roofing in Oildale (93301)

Oildale's terrain is flat valley floor with sandy-to-clay soil, which can shift slightly with seasonal moisture changes. Many properties here have detached garages, add-on rooms, and mature trees that drop limbs and debris onto roofs. The low-pitch roofs common in the area are prone to ponding water and fastener failures, especially after years of UV degradation. We also see a lot of wind-lifted shingles and flashing gaps around chimneys and vents. Our team knows how to handle these issues and will recommend the right metal roofing system for your home's specific needs, whether that is standing seam, corrugated panels, or a stone-coated steel option that mimics the look of shingles or tile.

We have been serving Oildale and the surrounding Bakersfield area for years, and we have the experience to deal with the unique quirks of older homes. From checking the condition of the decking to ensuring proper ventilation, we do the job right the first time. Our crews are fully insured, and we pull the necessary permits through the local building department to make sure your project meets code.

Our services in Oildale

How a Job Works in Oildale

Step 1: Give us a call at (661) 493-8685 or request a free estimate online. We will schedule a time to come out and inspect your current roof, discuss your options, and provide a detailed written estimate. We will also check for any signs of damage that might need immediate attention.

Step 2: Once you approve the estimate, we will order materials and schedule the work. For many Oildale homes, access can be tight, so we plan accordingly to minimize disruption. We will also coordinate with the city for permits if needed, and we will keep you informed throughout the process. Our crew will remove the old roofing, inspect and repair the decking as necessary, and install your new metal roof with precision.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the property with you to ensure everything meets your satisfaction. We leave your yard and driveway clean, just as we found them, and we back our work with a warranty.

Pricing for metal roofing in Oildale varies based on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, such as fixing a leak or replacing screws, start at $450 and $750 respectively. Coating and painting can extend the life of your current metal roof for as low as $2.50 per square foot. We always provide a free estimate so you know exactly what to expect. Call us at (661) 493-8685 to schedule yours.

My Oildale ranch home has a low-pitch roof that often ponds water. Can metal roofing help with that?
Yes, metal roofing is an excellent choice for low-pitch roofs because it sheds water quickly and resists pooling. However, proper installation is key. We will assess your roof's slope and recommend a panel profile and underlayment that will perform well. For very low slopes, we may suggest a standing seam system with hidden fasteners to minimize leak points.
A windstorm just lifted some panels on my roof near the Oildale oil fields. How quickly can you respond?
We offer free inspections for storm and wind damage and can often schedule an assessment within 24 to 48 hours. Call us at (661) 493-8685 to report the damage. Our team will secure the area, document the damage for insurance purposes, and provide a repair estimate. We prioritize emergency repairs to prevent further water intrusion.
What is the typical cost to replace a shingle roof with metal on a 1,500 square foot home in Oildale?
For a 1,500 square foot home, a basic metal roof replacement might range from $12,000 to $18,000, depending on the material and complexity. Standing seam or stone-coated steel will be at the higher end. We factor in the condition of the decking, removal of old layers, and any necessary repairs. Contact us for a free estimate tailored to your home.
Do I need a permit from the City of Bakersfield to install a metal roof in Oildale?
Yes, roofing permits are typically required for a full replacement or re-roof in Oildale, which falls under the City of Bakersfield's jurisdiction. The exact requirements and fees vary, so we always verify with the local building department before starting work. We handle the permitting process for you to ensure compliance.
My neighbor's tree branches hang over my roof. Can I trim them, or do I need to worry about property lines?
In California, you generally have the right to trim branches that encroach onto your property, but you should not damage the tree's health. It is best to discuss with your neighbor first. If the tree is on their property and poses a risk, you may need their cooperation. For HOA communities in Oildale, check with the HOA for any rules about tree maintenance and roof installation.
Are you fully insured for roofing work in Oildale?
Absolutely. We carry general liability insurance and workers' compensation coverage for all our crews. This protects you and your property in the unlikely event of an accident. We are happy to provide proof of insurance upon request.
How often should I have my metal roof inspected in Oildale's dusty, hot climate?
We recommend an annual inspection, ideally in the spring before the summer heat, to check for loose fasteners, debris buildup, and any signs of wear. The extreme UV and dust in Oildale can degrade sealants and coatings over time. Regular maintenance can extend the life of your roof and catch small issues before they become costly repairs.
Why choose us?

Trusted professionals in Bakersfield

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Bakersfield

All your work handled by qualified professionals in Bakersfield

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

297+ Verified Client Reviews in Bakersfield

⭐⭐⭐⭐⭐ 4.9/5 · 297 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Bakersfield · Response within 24h · No commitment · ☎ (661) 493-8685

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Bakersfield ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm